TEKBOND Bitumen Flash Tape (50MM / 75MM / 100MM)

TEKBOND Flashing Tape (Self Adhesive Bitumen Tape) – Seal leaks in drain pipes & guttering, Repair roofing felt joints.

Tekbond bitumen tape bonds with most building materials to provide a strong, watertight seal. It requires no separate adhesive and can be easily applied using hand pressure and a seam roller, with no special equipment for cutting, forming or fixing required.

Applications:
– Bonds to most building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, roofing felt and rigid plastics.
– Replace damaged lead flashing.
– Seal upstands and eve pieces.
– Roof capping.
– Edge flashing on roofing felt.
– Repair roofing felt or joints on flat roofs.
– Seal or repair valley gutters, guttering and down pipes.

Features:
– Very high bond strength to various building surfaces.
– High elasticity and excellent flexibility.
– Tear and impact resistant.
– Forms a watertight seal.
– For new build or emergency repairs.
– Quick and easy application.

Preparation & Directions for use:
– Surfaces must be structurally sound, clean, dry and free from surface contaminants such as grease, oil, rust, dirt, paint and loose materials.
– Gaps, deep hollows and depressions greater than 3mm should be filled with an appropriate filler.
– Once ready for application, gradually remove the protective release film before applying the sealing tape directly on the surface.

Sizes available: 2’’ (50mm), 3’’ (75mm), 4’’ (100mm)